Skip to main content
x

Laboratories

AC Machines Laboratory

1

The AC Machines Laboratory is to expose students to the concepts of single phase and three phase transformers, synchronous and asynchronous machines and analyze their performance. The starting and speed control of three-phase induction motors and single phase induction motors is also studied.

AC Machines Laboratory consist of following Equipment's for practical and analysis such as

  • Synchronous and Asynchronous three phase Alternator for generation of electricity
  • Synchronous motor
  • AC series motor.

Total cost of Laboratory: 3, 40,030 INR

Total Laboratory area     : 66 square meter

 

DC Machines Laboratory

2

The department possesses well equipped DC Machines Lab. The objective of DC Machine Lab is to provide the students in hand experience of D.C Machines. Lab also contains different measuring instruments which are useful to understand the different parameters of the machines under different condition.

DC Machines Laboratory consist of following Equipment's for practical and analysis such as

  • DC Shunt Machine Set
  • DC Shunt Motor.
  • DC Shunt Motor with BDA.
  • DC Series Motor with BDA
  • Stroboscope
  • Digital Contact Type Tachometer.

Total cost of Laboratory: 3, 30,597 INR

Total Laboratory area     : 66 square meter

 

Power Electronics Laboratory:

3

Power electronics is the application of solid-state electronics to the control and conversion of electric power. Generally used in modern industrial applications for voltage control and various other applications

  • Single Phase Fully Controlled Converter.
  • 1 Phase Fully And Half Controlled Converter.
  • Single Phase Cascade Inverter

Total cost of Laboratory :4,18,600 INR

Total Laboratory area : 66 square meter

 

Electrical Measurement & Instrument Laboratory

5

Each experimental bench is equipped with variable AC and DC power supplies with adequate protections, which enables students to carry out the experiments in an electrically safe environment. The lab is equipped with energy meters, power meters, voltage meters, ammeters, various size and type of transformers, various types of power cable.

EMI Lab Consist of The Following equipment’s for Practical Analysis such as

  • Measurement of Three Phase Power Using Two Wattmeter method.
  • Measurement of Three Phase Power Using One Wattmeter method.
  • Measurement of Three Phase Power Using Three CTs & Two Wattmeter method.
  • Study of Maxwell Bridge.

Total Cost:  85,285

Lab Area 66 Sqm.

 

Basic Electrical Laboratory

6

The Basic Electrical Laboratory is utilized for performing experiments related to fundamental of Electrical & Electronic Engineering. This lab covers all the basic devices that serve as the most basic building block of almost all electrical & Electronics Devices. 

The experiments are designed to expose students to the practical execution of electrical Engineering.

BEE Lab Consist of The Following equipment’s for Practical Analysis such as

  • Verification of Kirchhoff’s Law Trainer Kit.
  • Thevenin’s Theorem Trainer Kit.
  • Superposition Theorem Trainer Kit.

Total Cost:  62,300

Lab Area 66 Sqm.

 

Power system / Network Analysis Laboratory

9

Power system deals with electrical energy generation, transmission and distribution. Power system laboratory play an important role in Electrical Engineering to utilize the electrical energy efficiently. Power system and network lab equipment’s are used to analyse the performance of power system and its networking.

NA/PS Lab consist of following Equipment for Practical Analysis such as

  1. Transmission line Training Kit
  2. Dc motor Generator set for Zero ,negative and positive sequence impedance calculation
  3. Synchronous motor
  4. 3 Phase inductive load
  5. RLC series parallel circuit
  6. Superposition ,Thevnins theorem and maximum power trainee kit

Lab Cost:  24300/-

Lab Area 66 Sqm

 

Microcontroller Laboratory

10

Microcontroller lab deals with interfacing of hardware with computer Software. Its helpful for performance of various software based experiment in different subject of Electrical Branch. This lab provide hands-on experiment to infertace input-output device with computer simulation

Microcontroller Lab consist of following Equipment for Practical Analysis such as

  • 8085 trainee kit
  • 8255 trainee kit
  • PIO based sepper motor controller card
  • PIO based thermocoupl card
  • 18 PC

Lab Cost: 463542/-

 

Switchgear & Protection Laboratory

12

In this SGP Laboratory testing of switchgear is performed on kits, also relay characteristics. Testing of conductor and testing of fuse /MCB is performing through experimental panels.

Switchgear & Protection Lab consist of following Equipment for Practical Analysis such as

  • Switchgear Testing Kit.
  • Thermal Overload Relay For Induction Motor Protection
  • Fuse MCB Testing Kit.
  • ACB Testing Kit.
  • IDMT Type Induction Over Current Relay
  • MCCB, RCCB

Total Cost:  3,79,800

Lab Area 66 Sqm

 

PLC and Control system Laboratory

fd

PLC and Control system Lab presently composed of hardware based and software based experiments. This lab plays an important role to make the students understand how the simulation takes place. After simulation it is easy to implement it on hardware.

PLC and Control system Lab consist of following Equipment for Practical Analysis such as

  • PLC Control System.
  • Demonstration of Bottle Filling System Using PLC.
  • PID Control Of Dc Motor Speed Control System.
  • Sensor With Das (Set Up).
  • LVDT Load Cell.
  • RTD, Thermistor, Thermocouple.

Total cost of Laboratory: 3, 17,800 INR

Total Laboratory area     : 66 square meter